|
Browse FAQs by Topic
|
 |
|
|
|
|
|
|
50 FAQs Found in All Topics
|
|
|
|
|
|
|
|
Q:
|
|
Will the RS8300 handset work with the RS81 radio?
|
|
|
|
| A: |
The RS8300 handset is not compatible with the RS81.
|
| |
|
|
|
|
|
|
Q:
|
|
Sirius Weather 6100i - What's in the box? (6100i PA)
|
|
|
|
| A: |
Weather Module, Sirius Antennaw/25' cable, Network X-Over, Power cable 3 pin, Mounting hardware 6 screws, Operation Manual, Install Manual, Warranty Statement, Mounting Template, Owner Registration Card.
|
| |
|
|
|
|
|
|
Q:
|
|
I own the 7100, 5500, and the 4380 where do I find the serial numbers so I can register?
|
|
|
|
| A: |
The serial numbers on the Tracker 5500 and the Fish Finder 4380 are located on the back of the display. The serial number for the 7100 VHF is located on the bottom of the radio.
|
| |
|
|
|
|
|
|
Q:
|
|
What cameras are recommended for use with the Northstar M121?
|
|
|
|
| A: |
No specific camera. As long as it provides an NTSC, or PAL composite video signal, and is suitable for a marine environment.
|
| |
|
|
|
|
|
|
Q:
|
|
Is it possible for Navman to display engine data for 3 engines, using j1939 signals from the engines?
|
|
|
|
| A: |
Some of the Navman products can display engine data but only from Mercury engines with Smartcraft capability. At this time, Navman can only display Smartcraft data from a single engine or dual engines; but not three engines.
|
| |
|
|
|
|
|
|
Q:
|
|
I am looking for warranty coverage information on your products.
|
|
|
|
| A: |
Navman marine displays are warranted for two years and transducers are covered for 1 year. After the two year period, there is a flat rate repair fee and that fee varies depending on the model. coverage.
|
| |
|
|
|
|
|
|
Q:
|
|
My M84 will not accurately display speed over ground (SOG) in excess of 85 MPH. (M Series PA)
|
|
|
|
| A: |
The phenomenon you are experiencing is a result of the "Speed Filter" parameter being set too high. At high speeds, it is imperative that the "Speed Filter" is set to the minimum value (0 or 1) to calculate SOG accurately.
|
| |
|
|
|
|
|
|
Q:
|
|
High Definition Digital Radar - What's in the box? (Radar PA)
|
|
|
|
| A: |
2 KW Dome2 KW Radar Processor, Manual, Dome Mounting Template, Processor box mounting template, scanner to processor box cable, Hardware kit, Hexagonal bolt 5/16-18 x 1.25" Qty 4, 5/16 Spring Washer Qty 4, 5/16 Flat washer Qty 4, Rubber washer Qty 4.
|
| |
|
|
|
|
|
|
Q:
|
|
What do I need to add to a Tracker 5500 to display depth?
|
|
|
|
| A: |
The Tracker 5500 is only able to display depth information received from a depth device capable of communicating either NMEA or NavBus.
|
| |
|
|
|
|
|
|
Q:
|
|
How do I update my 958 software?
|
|
|
|
| A: |
Using a software update card. You put the update card into chart card slot and go to the software update screen and push Start update. Do not shut off unit till it is finished updating.
|
| |
|
|
|
|
|
|
Q:
|
|
Will the 3100 Fuel Flow work with the new MPI engines with return fuel lines?
|
|
|
|
| A: |
The 3100 Fuel Flow Meter is not suitable to be used on vessels using return fuel lines.
|
| |
|
|
|
|
|
|
Q:
|
|
Were can I get a MMIS number for my VHF? (VHF PA)
|
|
|
|
| A: |
You can go to the web site http://www.boatus.com/mmsi/.
|
| |
|
|
|
|
|
|
Q:
|
|
Explorer 701 2nd Station - What's in the Box? (VHF PA)
|
|
|
|
| A: |
Clip & Second Base Station
|
| |
|
|
|
|
|
|
Q:
|
|
Explorer 721 VHF - What's in the Box? (VHF PA)
|
|
|
|
| A: |
Explorer 721 VHF, Manual, Quickstart Guide, Knobs, Mic Clip, Flush Mount Kit, Speaker Cable, GPS/NMEA Cable, Power Cable, Yoke
|
| |
|
|
|
|
|
|
Q:
|
|
Explorer 710 - What's in the box? (VHF PA)
|
|
|
|
| A: |
Explorer 710 VHF, Manual, Knobs, MIC Clip, Flush mount kit, Yoke, Speaker Cable, NMEA cable, Power Cable.
|
| |
|
|
|
|
|
|
Q:
|
|
I have NMEA in and out on my GPS, but NMEA - in and out on the Navman. Which do I hook to what? (VHF PA)
|
|
|
|
| A: |
Connect NMEA + output wire from GPS to yellow NMEA + input wire on 7200. NMEA - or ground output wire from GPS to green NMEA - input wire on 7200. In set up menu in 7200, have NMEA is turned on.
|
| |
|
|
|
|
|
|
Q:
|
|
Can the AP22 use virtual feedback? (Autopilot PA)
|
|
|
|
| A: |
Unfortunately it is one of our pilots that is not capable of this.
|
| |
|
|
|
|
|
|
Q:
|
|
Which interface to you suggest when installing a Navman 3380 on an I/O vessel with cable steering? (Autopilot PA)
|
|
|
|
| A: |
The Navman 3380 autopilot does not have an interface for I/O vessels with cable steering. It will only interface to I/O configurations utilizing hydraulic steering mechanisms.
|
| |
|
|
|
|
|
|
Q:
|
|
I just recently bought a Tracker 5500 and need a map card for it. (Chartplotter PA)
|
|
|
|
| A: |
The chart card used in the Tracker 5500 is a C-Map NT+ card. You can purchase these CMap chart cards from most marine electronics supply stores.
|
| |
|
|
|
|
|
|
Q:
|
|
What data can be shared between a Tracker 5600 and JRC Radar 1000? (Chartplotter PA)
|
|
|
|
| A: |
Yes, GPS position data via NMEA. Tracker 5600 cannot display radar information on it's display.
|
| |
|
|
|
|
|
|
